Straightening fitting, for Door Straightening System, Planofit

For sliding doors, Black

Art. no. 407.90.209



Requested amount is in stock.
Limited stock available.
Item no longer available.

To receive items as fast as possible, choose 'When available' at checkout.

Piece Min. 1
Add to cart

Looks like you don't have permission to add this product to your cart. Kindly get in touch with your sales representative for assistance.

Your search for null returned no results.

Straightening fitting, for Door Straightening System, Planofit

For sliding doors, Black

Note: The image may show a similar article

40790209 product photo

For sliding doors, Black

Art. no. 407.90.209

Art. no. 407.90.209
Article details

Planofit adds rigidity to wooden sliding and hinged doors from 16 mm thick and prevents warping in either direction
Ideal for large, heavy doors
Can also be used to straight doors that have warped over a period of time
Normally two straightening fittings are recommended per door panel
1. The threaded rod is inserted into the trim strip and 2 x U-washers and a hexagonal nut is attached to both sides of it
2. The pre-mounted rod is then inserted into the groove
3. The tensioners are inserted into the boss drilling job and fixed with screws
4. Screw fix the retaining plates
5. The door can now be aligned using the tensioners with an open ended SW10 wrench
6. Position the cover caps on the tensioners

Area of application

For sliding doors

For door thickness

≥16 mm


Zinc alloy


Clip fixing

Order reference

Threaded rod and trim strip set to be ordered separately

Supplied with

Set consists of 2 x tensioners, 1 x hexagonal nut, 2 x securing washers, 1 x square nut, 2 x cover caps for tensioners, 4 x retaining plates

Complementary products and accessories
Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: